The Kimo Cordless Drill has some really good features built in
for example uses a brushless motor so it will operate a lot more efficient delivering
50% more runtime than a regular conventional motor.
24 Position Clutch
it has a 24 position clutch so you can dial in the appropriate amount of torque
for the application you’re using a fork besides the usual drill driver function.
The Kimo Cordless Drill also has a hammer mode and with you’ll be able to drill
into bricks concrete and masonry
The tool comes in very nice carrying case side handle charger 220 volt
2 amp power lithium ion rechargeable battery.
The Kimo 20 volt cordless drill/driver has rated torque output 660 inch pounds
At the low speed is 0 to 500 rpm and at the high speed is 0 to 2000 rpm
The Kimo Cordless Drill has a nice solid feel to it right here is a keyless chuck right
behind it is a 24 position clutch.
If you look right behind the clutch selection there a three selection modes you can choose.
The first one here is drill next one is Drive and the third one is hammer
and then behind here you have the speed selection there’s number two
and there’s number one.
The overall construction uses both metal and a composite material the handle
has a nice rubber grip to it.
Here’s a forward and reverse switch and there’s a trigger right above
that you have the LED lights to install the battery slide it in.
With the trigger you do have variable speed control so I pull on a little bit slow pull it more
and when I let go of the trigger it does stop immediately so you don’t have
to worry about overdriving or screw or bolts.
This Kimo Drill comes with this side handle to install it you place this portion of the handle
onto the top surface right here this is all metal so it’s a nice solid surface
and with the handle installed he’ll give you more leverage when you’re drilling
with this 20 volt 2 amp hour battery.
The charge time is 60 minutes then once the battery is fully charged
it can operate the tool for about an hour.
I’m very impressed with the performance of this Kimo 20 volt cordless drill/driver tool besides
having a brushless motor.
I like the fact that has three modes for you to choose you have the drill mode drive mode
and the hammer mode.
The hammer mode is definitely something I was interested in because that’s not something
you typically find on a drill driver tool and as you saw all three modes work really well
don’t forget you also get two lithium ion battery so you can continue working
on your project without interruption.
√330 In-lbs Max Torque
√3 Functions (Yes! Hammer Drilling is Included!)
√Hammer Drilling for Bricks/Walls
√Impact Drilling for Metal/Wood
√Screwdriving for Furniture Assembly
√3/8″ Keyless Metal Chuck
√21+1+1 Clutch for Precise Operations
√Variable Speed Trigger to Prevent Bits from Damaging
√2 Speed Setting – (0-350RPM, 0-1350RPM)
√Built-in LED to Provide Increased Visibility
➤KIMO 1000 Cycle Battery x 1
➤KIMO 60-Min Fast Charger x 1
➤KIMO 330 In-lbs Hammer/Drill/Driver x 1
➤KIMO Carrying Case
➤Flexible Drill Shaft for Tight Work Space
➤33 Screw-driving Bits
➤6 Twist Drill Bits
➤3 Brad Point Drill Bits
➤1 User Manual
➤KIMO 24-Month Warranty